What are the safety measures for the pressure spray dryer?

Summary:

·The explosion-proof measures of the pressure spray dryer.

1)Set the blasting plate and the explosive exhaust valve on the top of the side wall of the main tower of the pressure spray dryer.

2)Install the safety movable door (also known as explosion-proof door or over-pressure door). When the internal pressure of the pressure spray dryer is too high, the movable door will automatically open.

3) Pay attention to the operation of the pressure spray dryer : First turn on the centrifugal wind of the pressure spray dryer…

·Explosion-proof measures of the pressure spray dryer

1）Set the blasting plate and the explosion exhaust valve on the top of the main tower to dry the pressure spray dryer.

2）Install the safety movable door (also known as explosion-proof door or over-pressure door). When the internal pressure of the pressure spray dryer is too high, the movable door will automatically open.

·Pay attention to the operation of the pressure spray dryer

1）First turn on the centrifugal fan of the pressure spray dryer, and then turn on the electric heating to check if there is any air leakage. Normally, the cylinder can be preheated. The hot air preheating determines the evaporation capacity of the drying equipment. Without affecting the quality of the drying materials, try to increase the suction temperature.

2） When preheating, the valves at the bottom of the drying room of the pressure spray dryer and the discharge port of the cyclone separator must be closed to prevent cold air from entering the drying room and reduce the preheating efficiency.